Télécharger la liste

Description du projet

slarm64 - unofficial aarch64 Slackware Linux port

Nom l'heure Taille
(Dossier parent)
 README.TXT 2021-01-17 15:49 505 B 
 boot-20210102.tar.xz 2021-01-17 15:49 395.23 KB
 kernel
 slarm64-current-aarch64-base-station_p1-4.4.249-build-20210105.img.zst 2021-01-17 15:51 562.30 MB
 slarm64-current-aarch64-base-station_p1-4.4.249-build-20210105.img.zst.sha256 2021-01-17 15:51 137 B 
 slarm64-current-aarch64-base-station_p1-5.10.4-build-20210102.img.zst 2021-01-17 15:52 498.02 MB
 slarm64-current-aarch64-base-station_p1-5.10.4-build-20210102.img.zst.sha256 2021-01-17 15:52 136 B 
 slarm64-current-aarch64-xfce-station_p1-4.4.249-build-20210105.img.zst 2021-01-17 15:55 1.53 GB
 slarm64-current-aarch64-xfce-station_p1-4.4.249-build-20210105.img.zst.sha256 2021-01-17 15:55 137 B 
 slarm64-current-aarch64-xfce-station_p1-5.10.4-build-20210102.img.zst 2021-01-17 16:01 1.47 GB
 slarm64-current-aarch64-xfce-station_p1-5.10.4-build-20210102.img.zst.sha256 2021-01-17 16:01 136 B 
login: root
password: password

legacy kernel version 4.4.249
mainline kernel version 5.10.4

installation on a sdcard
    Unpack the IMAGE file and record by running the following on the SD card
( /dev/mmcblk0 = your sd card device ):

dd if=slarm64-current-*-base-rootfs-*-build-*.img of=/dev/mmcblk0 bs=1M
or
zstdcat slarm64-current-*-base-rootfs-*-build-*.img.zst > /dev/mmcblk0

to transfer a system with the SD to eMMC, you need to boot from the start and run the script:
    setup
or
    setup.sh