Logiciel Télécharger Carte

小さな µController （マイクロ チップ、アトメル、...) に基づく埋め込みデバイス用オペレーティング システムこの OS のデバイスを接続されている標準的な端末やシェルの統合と PC trought RS232 プロトコル (COM ポート、TTY または USB ポート） によって制御を有効にします。

Conserver provides remote access to serial port consoles and logs all data to a central host. Local and network serial connections are supported. Server console history can be replayed from the console app even if the server is down, and multiple users can connect to a single serial connection.

OpenEcoSys-NetworkViewer is a cross-platform Qt4 GUI used to interact with distributed embedded nodes on the network. The modular interface supports multiple transmission media and protocols. Real-time graphical visualization of remote variables hosted on embedded devices is made possible by a software stack called NETVProtocolStack and Arduino compatible boards and Microchip PIC (8,16, 32 bits) micro-controllers are supported. Logging facilities and JavaScript scripting are also available through a plug-in mechanism to interact with the remote variables. A plug-in mechanism is also available to implement new protocols and support new communication hardware.

The Linux Serial Sniffer allows you to sniff serial data up to 460Kbs via a Comtrol RocketPort or to 115Kbs using the standard ttyS0 and ttyS1 ports. Sniffed output can be captured to disk or displayed directly on screen. A user filter is included to assist specific customisation. The Linux Serial Sniffer can selectively operate in either a "ghost mode" where there is no data flow time impediments, or via a "capture and forward mode", where the user can flexibily intercept and extend the data stream to suit from either direction.

ConMan is a serial console management program designed to support a large number of console devices and simultaneous users. It supports local serial devices, remote terminal servers (via the telnet protocol), IPMI Serial-Over-LAN (via FreeIPMI), Unix domain sockets, and external processes (e.g., using Expect to control connections over telnet, ssh, or IPMI Serial-Over-LAN). Its features include logging (and optionally timestamping) console device output to file, connecting to consoles in monitor (R/O) or interactive (R/W) mode, allowing clients to share or steal console write privileges, and broadcasting client output to multiple consoles.

Spinner is useful for keeping telnet and ssh links from dropping due to inactivity. Many firewalls and some ISPs drop connections when they are perceived as idle. By having spinner running, the server is constantly sent a tiny amount of data over the link, preserving the connection. Spinner thus acts as a keep-alive. It displays a little "spinning" ASCII character in the top left corner of your terminal. It supports any terminal capable of handling VT100-style escape codes. Spinner can also function transparently by only sending null characters to the terminal. In this mode Spinner supports any terminal. It also has a mode called "Ghost in the Machine" in which you can use Spinner to write the spinner character to any TTY, not just your own.

vttest is a program to test the compatibility (or to demonstrate the non-compatibility) of so- called "VT100-compatible" terminals. Additional tests are provided for analysis of vt220/vt420 terminals and variants of xterm.

The Tinyserial library is a space-saving alternative to the Arduino software distribution's libraries for reading and writing characters and strings to the USART0 serial port on the Atmel ATmega168 and ATmega328p MCUs found on Arduino Diecimilla and Duemilanove boards. While the Arduino software distribution's libraries provide interrupt-driven serial I/O with far more features and support more MCUs, the Tinyserial library provides only the most basic polling-based serial I/O. However, the Tinyserial library uses far less Flash and SRAM, thereby giving you room to implement larger and more complicated applications on your boards. The Tinyserial library respects the GNU libc ABI, so you can call into it from C and C++ programs.