DTXC Bar length at the end is not loaded

• Rapporteur: beatme
• Propriétaire: yyagi
• Type: Bogues
• État: Atteints
• Composant: DTXCreator
• Jalon: 不具合確認・バグ修正
• Priorité: 5 - moyen
• Sévérité: 5 - moyen
• Résolution: Fixed
• Fichier: Aucun

Détails Répondre

If the DTX that is loaded with DTXCreator has a Bar length item (channel 0x02) that comes later than the last chip that appears in DTXCreator, the program does not load the Bar length into the editor.
This results in losing the Bar length if the DTX is saved with DTXCreator.

Example: Chips in a DTX only continue until Bar 050, but to fine-tune the ending timing of the DTX, Bar 051 uses a Bar length of 0.5 (2 Beats). (With an 0xC2 "02" item to hide the bar/beat lines)

The fix for this is to load the Bar length and display all Bars up to (including) that Bar number. (Similar to loading a chip?)

Ticket History (3/5 Histories)

2013-12-16 13:42 Updated by: beatme

• New Ticket "DTXC Bar length at the end is not loaded" created

2013-12-16 22:10 Updated by: yyagi

• Résolution Update from Aucun to Fixed
• Jalon Update from (Aucun) to 不具合確認・バグ修正
• Propriétaire Update from (Aucun) to yyagi
• Composant Update from (Aucun) to DTXCreator

Commentaire Répondre

Sorry for your inconvenience.

I fixed it. Please try tp://yyagi.com/DTXC_32639.zip

2013-12-17 02:53 Updated by: beatme

Commentaire Répondre

Thanks for the fix, it works as intended now I think.

2013-12-17 08:29 Updated by: yyagi

Commentaire Répondre

It seems good. Thanks.

I'll close the ticket later.

2013-12-18 03:42 Updated by: yyagi

• Ticket Close date is changed to 2013-12-18 03:42
• État Update from Ouvert to Atteints