Télécharger la liste

Description du projet

Argyll is an ICC compatible color management system. It supports accurate ICC profile creation for scanners, CMYK printers, and film recorders, and calibration and profiling of displays. Spectral sample data is supported, allowing a selection of illuminants observer types, and paper fluorescent whitener additive compensation. Profiles can also incorporate source specific gamut mappings for perceptual and saturation intents. Gamut mapping and profile linking uses the CIECAM02 appearance model, a unique gamut mapping algorithm, and a wide selection of rendering intents. It also includes code for a fast 8-bit raster color conversion engine as well as support for fast, fully accurate 16-bit conversion. Device color gamuts can also be viewed and compared using a VRML viewer.

Système requise

System requirement is not defined
Information regarding Project Releases and Project Resources. Note that the information here is a quote from Freecode.com page, and the downloads themselves may not be hosted on OSDN.

2012-03-20 06:28
1.3.6

Cette version ajoute le support de Spyder4. Soutien expérimental de ColorHug est compilé en, mais est désactivé sauf si l'environnement variable « ENABLE_COLORHUG » est défini. La sélection de l'affichage (-drapeau y) a été modifié et élargi soit instrument spécifique à l'appui de Spyder4 et ColorHug. Cette version tweaks fois intégration d'i1d3 et ajoute le mode d'affichage actualiser actualisation exacte période d'étalonnage. Elle change de logique de mesure i1disp pour essayer de rendre plus robuste contre lumière sombres changements pendant la lecture.
This release adds Spyder4 support. Experimental ColorHug support is compiled in, but is disabled unless the environment variable "ENABLE_COLORHUG" is set. The display selection (-y flag) has been changed and expanded to be instrument-specific to support Spyder4 and ColorHug. This release tweaks i1d3 integration times and adds accurate refresh period calibration to the refresh display mode. It changes i1disp measurement logic to try and make it more robust against light to dark changes during a reading.

2011-10-25 12:29
1.3.5

Soutien pour i1 affichage Pro et affichage ColorMunki colorimètres X-Rite (i1d3) et de nombreux tweaks, améliorations et corrections de bogues.
Support for X-Rite i1 Display Pro and ColorMunki Display colorimeters (i1d3), and numerous tweaks, improvements, and bugfixes.

2011-05-16 21:12
1.3.3

De nombreuses corrections de bugs mineurs et améliorations ont été apportées. Un rendu perceptif et la saturation (CIECAM02) problème qui a provoqué un décalage de point blanc et pauvre teinte bleue a été fixé.
Numerous minor bug fixes and feature enhancements were made. A perceptual and saturation rendering (CIECAM02) problem that caused a white point mismatch and poor blue hue was fixed.

2010-09-09 20:50
1.3.0

Un nouvel utilitaire ccmxmake a été ajouté pour Colorimètre Correction Matrices (. CCMX) pour une combinaison particulière Colorimètre + écran, qui peut ensuite être utilisé avec spotread, dispcal, et dispread. Une nouvelle option dispcal et dispread qui tente de contrer la dérive instrument noir et blanc d'affichage de dérive a été ajouté. Plusieurs bugs ont été fixés, y compris les problèmes avec les pilotes Eye-One Pro et ColorMunki.
A new ccmxmake utility was added to make Colorimeter Correction Matrices (.ccmx) for a particular Colorimeter + Display combination, which can then be used with spotread, dispcal, and dispread. A new dispcal and dispread option that attempts to counteract instrument black drift and display white drift was added. Several bugs were fixed, including problems with the Eye-One Pro and ColorMunki drivers.

2010-07-30 17:20
1.2.0

Gamut de cartographie a été améliorée. MS Windows support 64-bit pilote USB a été ajouté. L'outil illumread a été ajouté pour la lecture UV illuminant pour améliorer FWA (OBA) de compensation. corrections de bogues et améliorations mineures ont été effectuées.
Gamut mapping was improved. MS Windows 64-bit USB driver support was added. The illumread tool was added for reading illuminant U.V. for improved FWA (OBA) compensation. Minor bug fixes and improvements were done.

Project Resources