[Linux-ha-jp] Heartbeat3.0.6ソースインストールでのmakeエラーについて

Back to archive index

Masamichi Fukuda - elf-systems masamichi_fukud****@elf-s*****
2015年 3月 11日 (水) 11:27:34 JST


山内さん

こんにちは、福田です。

こちらも調べていますが、
済みませんが宜しくお願いします。

コンフィグファイルの指定で、スラッシュが2つ使われているのが気になります。
>なぜか/usr/etc/ha.d//ha.cfが無いと言ってきます。

宜しくお願いします。

以上

2015年3月11日水曜日、<renay****@ybb*****>さんは書きました:

> 福田さん
>
> おはようございます。山内です。
>
> >heartbeatのconfigureでは、コンフィグの配置は/etcにしているのですが、
> >なぜか/usr/etc/ha.d//ha.cfが無いと言ってきます。
> (snip)
> >configureの結果をみると、system configurationは/etcになっています。
> >現状、/usrの配下にはetcディレクトリもありません。
> >
> >
> >configureのオプションが間違っているのでしょうか。
>
> configureのオプションで指定出来るのかどうか?
> 確認してみますね。
>
> #私用の為、回答は明日になるかも知れません・・
>
> 以上です。
>
> ----- Original Message -----
> >From: Masamichi Fukuda - elf-systems <masamichi_fukud****@elf-s*****
> <javascript:;>>
> >To: 山内英生 <renay****@ybb***** <javascript:;>>; "
> linux****@lists***** <javascript:;>" <
> linux****@lists***** <javascript:;>>
> >Date: 2015/3/10, Tue 21:33
> >Subject: Re: [Linux-ha-jp] Heartbeat3.0.6ソースインストールでのmakeエラーについて
> >
> >
> >山内さん
> >
> >こんばんは、福田です。
> >ご返答ありがとうございます。
> >
> >resource-agentをインストールしました。
> >ocf-shellfuncsは、RHELと同じ場所に配置されました。
> >ありがとうございました。
> >
> >これで起動してみたところ、shellfuncsやocd-shellfuncsのエラーは無くなりました。
> >ですが今度は、コンフィグファイル(ha.cf)の配置がおかしいようで
> >次のメッセージがでます。
> >
> ># /etc/init.d/heartbeat start
> >Starting High-Availability services:  Heartbeat failure [rc=6]. Failed.
> >
> >Mar 10 21:17:43 lbv1.beta.com heartbeat: [4784]: ERROR: Cannot open
> config file [/usr/etc/ha.d//ha.cf]
> >Mar 10 21:17:43 lbv1.beta.com heartbeat: [4784]: info: An annotated
> sample /usr/etc/ha.d//ha.cf file is provided in the documentation.
> >Mar 10 21:17:43 lbv1.beta.com heartbeat: [4784]: info: Please copy it to
> /usr/etc/ha.d//ha.cf, read it, customize it, and try again.
> >Mar 10 21:17:43 lbv1.beta.com heartbeat: [4784]: ERROR: Heartbeat not
> started: configuration error.
> >Mar 10 21:17:43 lbv1.beta.com heartbeat: [4784]: ERROR: Configuration
> error, heartbeat not started.
> >
> >heartbeatのconfigureでは、コンフィグの配置は/etcにしているのですが、
> >なぜか/usr/etc/ha.d//ha.cfが無いと言ってきます。
> >
> >heartbeatは再度インストールして、configureは次のようにしました。
> >
> ># ./configure --prefix=/usr/local/heartbeat --localstatedir=/var
> --sysconfdir=/etc --disable-fatal-warnings
> --includedir=/usr/local/cluster-glue/include
> >
> >heartbeat configuration: Version                  = "3.0.6"
> Executables              = "/usr/local/heartbeat/sbin" Man
> pages                = "/usr/local/heartbeat/share/man"
> Libraries                = "/usr/local/heartbeat/lib" Header
> files             = "/usr/local/cluster-glue/include" Arch-independent
> files   = "/usr/local/heartbeat/share" Documentation files      =
> "/usr/local/heartbeat/share/doc/heartbeat" State information        =
> "/var" System configuration     = "/etc" Init (rc) scripts        =
> "/etc/init.d" Init (rc) defaults       = "/etc/default" Use system
> LTDL          = "yes" HA group name            = "haclient" HA group
> id              = "113" HA user name             = "hacluster" HA user user
> id          = "109" Build dopd plugin        = "yes" Enable times
>  kludge      = "yes" CC_WARNINGS              = " -Wall
> -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes
> -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual
> -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute
> -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long
> -Wno-strict-aliasing  " Mangled CFLAGS           = "-g -O2  -Wall
> -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes
> -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual
> -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute
> -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long
> -Wno-strict-aliasing   -ggdb3 -funsigned-char" Libraries                =
> "-lbz2 -lz -lc -luuid -lrt -ldl  -lltdl" RPATH enabled            = ""
> Distro-style RPMs        = "no"
> >
> >configureの結果をみると、system configurationは/etcになっています。
> >現状、/usrの配下にはetcディレクトリもありません。
> >
> >
> >configureのオプションが間違っているのでしょうか。
> >
> >何度もすみませんが、宜しくお願いします。
> >
> >以上
> >
> >
> >
> >2015年3月10日 17:50 <renay****@ybb***** <javascript:;>>:
> >
> >福田さん
> >>
> >>こんにちは、山内です。
> >>
> >>glue,Heartbeatの他に、resource-agentもインストールして頂く必要があります。
> >>
> >>最新のリリース版は、3.9.6です。
> >>
> >>
> >>https://github.com/ClusterLabs/resource-agents/tree/v3.9.6
> >>
> >>
> >>インストールは、Debianでも、該当ソースを展開後に、autogen、configureの手順で大丈夫かと思います.
> >>
> >>
> >>ちなみに、私の環境(RHEL6.4)ですが、以下に配置されています。
> >>[root @ rh64-heartbeat1 resource-agents-master]# ls -lt
>  /usr/lib/ocf/lib/heartbeat/ocf-shellfuncs
> >>-rw-r--r-- 1 root root 17925  3月 10 17:43 2015
> /usr/lib/ocf/lib/heartbeat/ocf-shellfuncs
> >>
> >>#外していたら、申し訳ありません。
> >>
> >>以上です。
> >>
> >>
> >>----- Original Message -----
> >>>From: Masamichi Fukuda - elf-systems <masamichi_fukud****@elf-s*****
> <javascript:;>>
> >>>To: 山内英生 <renay****@ybb***** <javascript:;>>; "
> linux****@lists***** <javascript:;>" <
> linux****@lists***** <javascript:;>>
> >>
> >>>Date: 2015/3/10, Tue 16:11
> >>>Subject: Re: [Linux-ha-jp] Heartbeat3.0.6ソースインストールでのmakeエラーについて
> >>>
> >>>
> >>>山内さん
> >>>
> >>>こんにちは、福田です。
> >>>
> >>>sysconfdir等のオプションを付け直して再インストールしてみました。
> >>>
> >>>cluster glueは、/usr/local/cluster-glueにインストールしました。
> >>>cluster-glueのconfigureの結果です。
> >>>
> >>># ./configure --prefix=/usr/local/cluster-glue
> >>>(一部抜粋です)
> >>>  Features                 =
> >>>
> >>>  Prefix                   = /usr/local/cluster-glue
> >>>  Executables              = /usr/local/cluster-glue/sbin
> >>>  Man pages                = /usr/local/cluster-glue/share/man
> >>>  Libraries                = /usr/local/cluster-glue/lib
> >>>  Header files             = /usr/local/cluster-glue/include
> >>>  Arch-independent files   = /usr/local/cluster-glue/share
> >>>  Documentation            =
> /usr/local/cluster-glue/share/doc/cluster-glue
> >>>  State information        = /usr/local/cluster-glue/var
> >>>  System configuration     = /usr/local/cluster-glue/etc
> >>>
> >>>
> >>>heartbeat最新版は/usr/local/heartbeatにインストールしたいため
> >>>configureは次のオプションをつけています。
> >>>
> >>>./configure --prefix=/usr/local/heartbeat --localstatedir=/var
> >>--sysconfdir=/etc --disable-fatal-warnings CFLAGS="$CFLAGS
> >>-L/usr/local/cluster-glue/lib -I/usr/local/cluster-glue/include
> >>-I/usr/local/cluster-glue/include/heartbeat/"
> >>--includedir=/usr/local/cluster-glue/include
> >>>
> >>>CFLAGSとincludedirの指定があっているのか?不安なんですが、
> >>>configureの結果は次のとおりです。
> >>>
> >>>heartbeat configuration:
> >>>  Version                  = "3.0.6"
> >>>  Executables              = "/usr/local/heartbeat/sbin"
> >>>  Man pages                = "/usr/local/heartbeat/share/man"
> >>>  Libraries                = "/usr/local/heartbeat/lib"
> >>>  Header files             = "/usr/local/heartbeat/include"
> >>>  Arch-independent files   = "/usr/local/heartbeat/share"
> >>>  Documentation files      = "/usr/local/heartbeat/share/doc/heartbeat"
> >>>  State information        = "/var"
> >>>  System configuration     = "/etc"
> >>>  Init (rc) scripts        = "/etc/init.d"
> >>>  Init (rc) defaults       = "/etc/default"
> >>>  Use system LTDL          = "yes"
> >>>  HA group name            = "haclient"
> >>>  HA group id              = "113"
> >>>  HA user name             = "hacluster"
> >>>  HA user user id          = "109"
> >>>  Build dopd plugin        = "yes"
> >>>  Enable times kludge      = "yes"
> >>>  CC_WARNINGS              = " -Wall -Wmissing-prototypes
> -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement
> -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align
> -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2
> -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing  "
> >>>  Mangled CFLAGS           = " -L/usr/local/cluster-glue/lib
> -I/usr/local/cluster-glue/include
> -I/usr/local/cluster-glue/include/heartbeat/  -Wall -Wmissing-prototypes
> -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement
> -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align
> -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2
> -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing
> -ggdb3 -funsigned-char"
> >>>  Libraries                = "-lbz2 -lz -lc -luuid -lrt -ldl  -lltdl"
> >>>  RPATH enabled            = ""
> >>>  Distro-style RPMs        = "no"
> >>>
> >>>とりあえずこれでmake installまでは終わっています。
> >>>
> >>>そして起動すると、今度は先ほどとはちょっと違うメッセージが出てしまいました。
> >>>
> >>># /etc/init.d/heartbeat start
> >>>/etc/init.d/heartbeat: 96: .: Can't open
> /usr/lib/ocf/lib//heartbeat/ocf-shellfuncs
> >>>
> >>>
> >>>/etc/ha.dにshellfuncsがありますが、これは今回インストールされたものではなく
> >>>パッケージで導入した時のもののようです。
> >>>
> >>># ls -la shellfuncs
> >>>-rw-r--r-- 1 root root 2082 Mar 10  2014 shellfuncs
> >>>
> >>>また、メッセージに出ているocf-shellfuncsはfindで探しましたが、ありませんでした。
> >>>
> >>>以前、パッケージで導入したノード2側を見るとocf-shellfuncsがあります。
> >>>
> >>>ノード2
> >>># find / -name ocf-shellfuncs
> >>>/usr/lib/ocf/lib/heartbeat/ocf-shellfuncs
> >>>/usr/share/cluster/ocf-shellfuncs
> >>>
> >>>インストールが完了していないのでしょうか。
> >>>
> >>>宜しくお願いします。
> >>>
> >>>以上
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>2015年3月10日 12:52 <renay****@ybb***** <javascript:;>>:
> >>>
> >>>福田さん
> >>>>
> >>>>こんにちは、山内です。
> >>>>
> >>>>configureコマンド時のオプション指定で解決するかと思います。
> >>>>
> >>>>./configure --prefix=/usr --localstatedir=/var --sysconfdir=/etc
> >>>>
> >>>>たぶん、sysconfdir当たりのデフォルトが違うせいだと思います。
> >>>>
> >>>>一旦、アンインストールして、再度configureでsysconfdirのオプションを指定してみてください。
> >>>>
> >>>>#外しているかも知れませんが・・・・
> >>>>
> >>>>以上です。
> >>>>
> >>>>
> >>>>----- Original Message -----
> >>>>>From: Masamichi Fukuda - elf-systems <
> masamichi_fukud****@elf-s***** <javascript:;>>
> >>>>
> >>>>>To: 山内英生 <renay****@ybb***** <javascript:;>>; "
> linux****@lists***** <javascript:;>" <
> linux****@lists***** <javascript:;>>
> >>>>>Date: 2015/3/10, Tue 11:25
> >>>>>Subject: Re: [Linux-ha-jp] Heartbeat3.0.6ソースインストールでのmakeエラーについて
> >>>>>
> >>>>>
> >>>>>山内さん
> >>>>>
> >>>>>こんにちは、福田です。
> >>>>>
> >>>>>
> >>>>>おかげさまでインストールは完了しました。
> >>>>>ありがとうございました。
> >>>>>
> >>>>>
> >>>>>ただ、/etc/init.d/heartbeatで起動したのですが、
> >>>>>
> >>>>># /etc/init.d/heartbeat start
> >>>>>/etc/init.d/heartbeat: 57: .: Can't open
> /usr/local/heartbeat/etc/ha.d/shellfuncs
> >>>>>
> >>>>>
> >>>>>shellfuncsは以前パッケージで導入した/etc/ha.dにはあります。
> >>>>>
> >>>>>今回heartbeatは、/usr/local/heartbeatディレクトリにインストールしたのですが。
> >>>>>
> >>>>>
> >>>>>宜しくお願いします。
> >>>>>
> >>>>>以上
> >>>>>
> >>>>>
> >>>>>2015年3月10日 10:14 <renay****@ybb***** <javascript:;>>:
> >>>>>
> >>>>>
> >>>>>>福田さん
> >>>>>>
> >>>>>>山内です。こんにちは。
> >>>>>>
> >>>>>>環境に、xsltprocコマンドが入っていないのではないでしょうか?
> >>>>>>
> >>>>>>make時に以下のようにxsltprocコマンドを利用しています。
> >>>>>>
> >>>>>>(snip)
> >>>>>>XPERIMENTALDIRS =
> >>>>>>XSLTPROC = /usr/bin/xsltproc
> >>>>>>YACC = bison -y
> >>>>>>(snip)
> >>>>>>
> >>>>>>もしかすると、外しているかも知れませんが・・・
> >>>>>>
> >>>>>>以上です。
> >>>>>>----- Original Message -----
> >>>>>>>From: Masamichi Fukuda - elf-systems <
> masamichi_fukud****@elf-s***** <javascript:;>>
> >>>>>>
> >>>>>>>To: renay****@yahoo***** <javascript:;>; "
> linux****@lists***** <javascript:;>" <
> linux****@lists***** <javascript:;>>
> >>>>>>>Date: 2015/3/10, Tue 09:55
> >>>>>>>Subject: Re: [Linux-ha-jp] Heartbeat3.0.6ソースインストールでのmakeエラーについて
> >>>>>>>
> >>>>>>>
> >>>>>>>山内さん
> >>>>>>>
> >>>>>>>おはようございます、福田です。
> >>>>>>>早速ありがとうございます。
> >>>>>>>
> >>>>>>>--disable-fatal-warningsオプションを指定してconfigureを実行しましたら、
> >>>>>>>先ほどのエラーは出なくなりました。
> >>>>>>>
> >>>>>>>ところがまた別のエラーが出てしまいました。
> >>>>>>>
> >>>>>>>make[1]: Entering directory
> `/var/tmp/Heartbeat-3-0-958e11be8686/doc'
> >>>>>>>\
> >>>>>>>    --xinclude \
> >>>>>>>
> http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl
> heartbeat.xml
> >>>>>>>/bin/bash: line 2: --xinclude: command not found
> >>>>>>>make[1]: *** [heartbeat.8] Error 127
> >>>>>>>make[1]: Leaving directory `/var/tmp/Heartbeat-3-0-958e11be8686/doc'
> >>>>>>>make: *** [all-recursive] Error 1
> >>>>>>>
> >>>>>>>
> >>>>>>>bashでコマンドが見つからないと言われてしまいます。
> >>>>>>>
> >>>>>>>宜しくお願いします。
> >>>>>>>
> >>>>>>>以上
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>2015年3月10日 9:30 <renay****@yahoo***** <javascript:;>>:
> >>>>>>>
> >>>>>>>福田さん
> >>>>>>>>
> >>>>>>>>おはようございます。山内です。
> >>>>>>>>
>
> >>>>>>>>外しているかも知れませんが、--disable-fatal-warningsオプションを指定して./configureを実行してみてはどうでしょうか?
> >>>>>>>>
> >>>>>>>>エラー自体は、未使用変数に関するものですので、構築出来れば、無視しても問題ないはずです。
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>以上です。
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>----- Original Message -----
> >>>>>>>>>From: Masamichi Fukuda - elf-systems <
> masamichi_fukud****@elf-s***** <javascript:;>>
> >>>>>>>>>To: "linux****@lists***** <javascript:;>" <
> linux****@lists***** <javascript:;>>
> >>>>>>>>>Date: 2015/3/10, Tue 05:53
> >>>>>>>>>Subject: [Linux-ha-jp] Heartbeat3.0.6ソースインストールでのmakeエラーについて
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>お世話になります、福田です。
> >>>>>>>>>
> >>>>>>>>>検証のため、heartbeat3.0.6 + pacemaker1.1.12のインストールを開始しました。
> >>>>>>>>>OSはdebian7.8です。
> >>>>>>>>>
> >>>>>>>>>cluster glue1.0.12はソースインストール完了しました。
> >>>>>>>>>pacemakerはまだ手を付けていません。
> >>>>>>>>>
> >>>>>>>>>heartbeat3.0.6のインストールについて質問させて頂きます。
> >>>>>>>>>
> >>>>>>>>>$ ./bootstrap
> >>>>>>>>>$ ./configure
> >>>>>>>>>
> >>>>>>>>>は正常終了しています。
> >>>>>>>>>
> >>>>>>>>>make時に次のエラーが出ます。
> >>>>>>>>>
> >>>>>>>>>Making all in buildtools
> >>>>>>>>>make[1]: Entering directory
> `/var/tmp/Heartbeat-3-0-958e11be8686/buildtools'
> >>>>>>>>>gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../include
> -I/usr/local/include/heartbeat -I/usr/include/glib-2.0
> -I/usr/lib/x86_64-linux-gnu/glib-2.0/include    -Wno-unused -g -O2  -Wall
> -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes
> -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual
> -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute
> -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long
> -Wno-strict-aliasing -Werror  -ggdb3 -funsigned-char -MT ccdv-ccdv.o -MD
> -MP -MF .deps/ccdv-ccdv.Tpo -c -o ccdv-ccdv.o `test -f 'ccdv.c' || echo
> './'`ccdv.c
> >>>>>>>>>ccdv.c: In function 'SlurpProgress':
> >>>>>>>>>ccdv.c:116:32: error: variable 'trailcp' set but not used
> [-Werror=unused-but-set-variable]
> >>>>>>>>>ccdv.c:114:29: error: variable 'tleft' set but not used
> [-Werror=unused-but-set-variable]
> >>>>>>>>>ccdv.c: In function 'main':
> >>>>>>>>>ccdv.c:362:11: error: variable 'retval' set but not used
> [-Werror=unused-but-set-variable]
> >>>>>>>>>cc1: all warnings being treated as errors
> >>>>>>>>>make[1]: *** [ccdv-ccdv.o] Error 1
> >>>>>>>>>make[1]: Leaving directory
> `/var/tmp/Heartbeat-3-0-958e11be8686/buildtools'
> >>>>>>>>>make: *** [all-recursive] Error 1
> >>>>>>>>>
> >>>>>>>>>何か解決策がありましたら、ご教示お願いします。
> >>>>>>>>>
> >>>>>>>>>宜しくお願いします。
> >>>>>>>>>
> >>>>>>>>>以上
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>--
> >>>>>>>>>
> >>>>>>>>>ELF Systems
> >>>>>>>>>Masamichi Fukuda
> >>>>>>>>>mail to: masamichi_fukud****@elf-s***** <javascript:;>
> >>>>>>>>>_______________________________________________
> >>>>>>>>>Linux-ha-japan mailing list
> >>>>>>>>>Linux****@lists***** <javascript:;>
> >>>>>>>>>http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>>_______________________________________________
> >>>>>>>>Linux-ha-japan mailing list
> >>>>>>>>Linux****@lists***** <javascript:;>
> >>>>>>>>http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>--
> >>>>>>>
> >>>>>>>ELF Systems
> >>>>>>>Masamichi Fukuda
> >>>>>>>mail to: masamichi_fukud****@elf-s***** <javascript:;>
> >>>>>>>_______________________________________________
> >>>>>>>Linux-ha-japan mailing list
> >>>>>>>Linux****@lists***** <javascript:;>
> >>>>>>>http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>_______________________________________________
> >>>>>>Linux-ha-japan mailing list
> >>>>>>Linux****@lists***** <javascript:;>
> >>>>>>http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan
> >>>>>>
> >>>>>
> >>>>>
> >>>>>--
> >>>>>
> >>>>>ELF Systems
> >>>>>Masamichi Fukuda
> >>>>>mail to: masamichi_fukud****@elf-s***** <javascript:;>
> >>>>>
> >>>>>
> >>>>
> >>>>_______________________________________________
> >>>>Linux-ha-japan mailing list
> >>>>Linux****@lists***** <javascript:;>
> >>>>http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan
> >>>>
> >>>
> >>>
> >>>--
> >>>
> >>>ELF Systems
> >>>Masamichi Fukuda
> >>>mail to: masamichi_fukud****@elf-s***** <javascript:;>
> >>>
> >>>
> >>
> >>_______________________________________________
> >>Linux-ha-japan mailing list
> >>Linux****@lists***** <javascript:;>
> >>http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan
> >>
> >
> >
> >--
> >
> >ELF Systems
> >Masamichi Fukuda
> >mail to: masamichi_fukud****@elf-s***** <javascript:;>
> >
> >
>
>

-- 
ELF Systems
Masamichi Fukuda
mail to: *masamichi_fukud****@elf-s***** <elfsy****@gmail*****>*
-------------- next part --------------
HTML$B$NE:IU%U%!%$%k$rJ]4I$7$^$7$?(B...
Télécharger 



Linux-ha-japan メーリングリストの案内
Back to archive index