csp-qt

Fork

** Qt porting and FM-7/77/AV/AV40/EX for Common Source Code Project **

1.About

This package is Qt5 porting of Common Source Code Project (CSP) and built with Qt5, for Windows, built with MinGW(32bit).

Source Code:

Additional INFO:

2.Background Common Source Code Project (CSP) is good emulator writing. It also distributed with GPLv2, this is good for me. But codes are specified to M$ Visual C. I'm using GNU/Linux, and I starting to apply FM-7(or later). So, I start to port to GNU/Linux and using Qt4/Qt5.

What you need at least: a. Qt5 (neither Qt3 and Qt4) toolkit. b. Some OpenGL implementation, maybe at leaset OpenGL v2.x . c. gcc / g++ (4.7 or later? ) or llvm clang / clang++ (3.5 or later?) toolchain. d. SDL2 (not SDL1.x). e. CMake 2.8 or later.

• • TIPS: If emufoo.exe don't show screen drawing, set environment

3.How to build: After extracting (or git pulled) sourcecodes: $ cd {srctop}/source/build-cmake/{Machine name}/ $ mkdir build $ cd build

To configure: $ cmake .. or $ ccmake ..

To build: $ make

To install: $ sudo make install

4.Qt specified notice: ・Place R@Ms under $HOME/emu{Machine Name}/ , this directory has made after first using. ・Config file, {foo}.ini is writteon on $HOME/.config/emu{Machine Name}/ .

5.Status a. I tested to build only under Debian GNU/Linux "sid".

• • On windows, using MinGW is already okay, but not tested drawing.
  • Cross building with GNU/Linux's MinGW32 and Qt5.5.1 (for MinGW) is available. Modify and use build-cmake/config_build_cross_win32.sh and related *.cmake files.
  • And, you can also build with M$ Visual Studio 2013 or 2015.

b. Now, I using Qt5 as toolkit, because authors of Qt announced

c. All of virtual machines are already ported to Qt (On Oct 29, 2015): d. Now using GCC-6.1 with Link Time Optimize to build for distrubuted binaries.

Upstream repositry: https://github.com/Artanejp/common_source_project-fm7

Project Page: https://osdn.jp/projects/csp-qt/

Upstream (Takeda Toshiya San's original code) http://homepage3.nifty.com/takeda-toshiya/

Changes:

* SNAPSHOT August 19, 2016

• Upstream 2016-04-13
• WIN32 Replace libICU to homebrew, fix not starting.
• OSD/MOVIE_SAVER Fix frames to enqueue to MOVIUE_SAVER, as if VIDEO FPS >= RECORD FPS.
• MOVIE_LOADER Sync A/V on playing MOVIE.
• Built with GIT 77380a77b25ca06965b912c84509e5c91085aeb1 (or later) .

-- Aug 19, 2016 23:12:36 +0900 K.Ohta <whatisthis.sowhat@gmail.com>

* SNAPSHOT August 15, 2016

• Upstream 2016-04-13
• OSDMOVIE_SAVER Maybe correctness frame(s) counting with 60fps ヽ(=´▽=)ﾉ
• MOVIE_SAVER Fix sometimes crashing when stop to save movie.
• PX7/MOVIE_LOADER Sound Laser Disc, but not be smooth.
• MOVIE_SAVERPC8801PC9801 Adjust sound frequency when OVERRIDE_48000Hz , still choppy.
• Built with GIT 3f4c809912dc92cdeb34d8ecdebe0087aa7f37b3 (or later) .

-- Aug 16, 2016 02:40:55 +0900 K.Ohta <whatisthis.sowhat@gmail.com>

* SNAPSHOT August 09, 2016

• Upstream 2016-04-13
• PX7 Add movie loader for LD, but not tested enough yet.
• MOVIE_SAVER/OpenGL Add locking around drawing buffer.
• BUILD Update FFMPEG to 3.1.1 .
• FFMPEG/LINUX Enable OpenCL for ffmpeg @linux.You need libOpenCL.so.1 to use homebrew build.
• FFMPEG/WIN32 Enable DXVA2 for video-decoding accelerator.
• MOVIE_SAVER Synchronous OPEN->ENCODEING->CLOSING.
• UI/MOVIE_SAVER DO NOT change state of "Save as movie" without *real* starting/stopping.
• Draw/OpenGL Optimize GLSL's by https://github.com/aras-p/glsl-optimizer .
• Built with GIT fc7a03a9337287414e00777464ab273c4f44ea44 (or later) .

-- Aug 10, 2016 01:42:51 +0900 K.Ohta <whatisthis.sowhat@gmail.com>

Upstream changes:

4/13/2016

WINMAIN improve auto key for the case to switch upper/lowercase with capslock EMU/DEBUGGER fix issue that u command may cause the infinite loop

VM/DATAREC support to detect the frequency of signal VM/DATAREC fix to always adjust zero position of wave signal VM/UPD1990A fix not to check clk signal is low when stb signal is raised VM/UPD7810 support debugger VM/UPD7810 support MOV A,S opecode VM/UPD7810 fix not to change V register (thanks PockEmul)

PC2001 support NEC PC-2001 PC2001 fix cpu clock PC2001 support beep sound PC2001/IO support rtc control signals YALKY support Yuasa Kyouiku System YALKY YALKY/IO improve data recorder controller

Have fun! -- Ohta.

• Upstream 2016-04-13
• WIN32 Replace libICU to homebrew, fix not starting.
• OSD/MOVIE_SAVER Fix frames to enqueue to MOVIUE_SAVER, as if VIDEO FPS >= RECORD FPS.
• MOVIE_LOADER Sync A/V on playing MOVIE.
• Built with GIT 77380a77b25ca06965b912c84509e5c91085aeb1 (or later) .

-- Aug 19, 2016 23:12:36 +0900 K.Ohta <whatisthis.sowhat@gmail.com>

* SNAPSHOT August 15, 2016

• Upstream 2016-04-13
• OSDMOVIE_SAVER Maybe correctness frame(s) counting with 60fps ヽ(=´▽=)ﾉ
• MOVIE_SAVER Fix sometimes crashing when stop to save movie.
• PX7/MOVIE_LOADER Sound Laser Disc, but not be smooth.
• MOVIE_SAVERPC8801PC9801 Adjust sound frequency when OVERRIDE_48000Hz , still choppy.
• Built with GIT 3f4c809912dc92cdeb34d8ecdebe0087aa7f37b3 (or later) .

-- Aug 16, 2016 02:40:55 +0900 K.Ohta <whatisthis.sowhat@gmail.com>

* SNAPSHOT August 09, 2016

• Upstream 2016-04-13
• PX7 Add movie loader for LD, but not tested enough yet.
• MOVIE_SAVER/OpenGL Add locking around drawing buffer.
• BUILD Update FFMPEG to 3.1.1 .
• FFMPEG/LINUX Enable OpenCL for ffmpeg @linux.You need libOpenCL.so.1 to use homebrew build.
• FFMPEG/WIN32 Enable DXVA2 for video-decoding accelerator.
• MOVIE_SAVER Synchronous OPEN->ENCODEING->CLOSING.
• UI/MOVIE_SAVER DO NOT change state of "Save as movie" without *real* starting/stopping.
• Draw/OpenGL Optimize GLSL's by https://github.com/aras-p/glsl-optimizer .
• Built with GIT fc7a03a9337287414e00777464ab273c4f44ea44 (or later) .

-- Aug 10, 2016 01:42:51 +0900 K.Ohta <whatisthis.sowhat@gmail.com>