Liste des projets simples Logiciel Télécharger Carte

1402 projects in result set
Dernière Mise à Jour: 2023-05-27 16:28

Clonezilla

Clonezilla is a partition and disk imaging/cloning program similar to True Image®. It saves and restores only used blocks in hard drive. Two types of Clonezilla are available, Clonezilla live and Clonezilla SE (Server Edition).

* Filesystem supported: ext2, ext3, ext4, reiserfs, xfs, jfs of GNU/Linux, FAT, NTFS of MS Windows, HFS+ of Mac OS, UFS of BSD, minix of Minix and VMFS of VMWare ESX. Therefore you can clone GNU/Linux, MS windows and Intel-based Mac OS, no matter it's 32-bit (x86) or 64-bit (x86-64) OS. For these file systems, only used blocks in partition are saved and restored. For unsupported file system, sector-to-sector copy is done by dd in Clonezilla * LVM2 (LVM version 1 is not) under GNU/Linux is supported. * Multicast is supported in Clonezilla SE, which is suitable for massive clone.

For more info about Clonezilla, including usage, installation and forum, please visit this website: https://clonezilla.org

Statut de développement: 5 - Production / écurie
Langage naturel: Chinese, English
Système d'exploitation: Linux
Langage de programmation: Perl, Coque Unix
Activity Percentile: 867
Activity Ranking: 12Ranking
Register Date: 2016-02-29 12:45
Dernière Mise à Jour: 2021-06-23 13:00

Android-x86

This is a project to port Android open source project to x86 platform, formerly known as "patch hosting for android x86 support". http://www.android-x86.org/

The original plan is to host different patches for android x86 support from open source community. A few months after we created the project, we found out that we could do much more than just hosting patches. So we decide to create our code base to provide support on different x86 platforms, and set up a git server to host it.

This is an open source project licensed under Apache Public License 2.0. Some components are licensed under GNU General Public License (GPL) 2.0 or later.

Statut de développement: 5 - Production / écurie
Utilisateurs cibles: Advanced End Users, Développeurs
Langage naturel: Chinese (Traditional), English
Système d'exploitation: Android
Langage de programmation: C, C++, Coque Unix
Sujet: Live CD
Interface utilisateur: Graphical
Activity Percentile: 359
Activity Ranking: 18Ranking
Register Date: 2016-04-22 19:23
Dernière Mise à Jour: 2019-12-14 16:04

Diskless Remote Boot in Linux (DRBL)

DRBL provides diskless or systemless environment. It uses distributed hardware resources and makes it possible for clients to fully access local hardware. It also includes Clonezilla, a partition and disk cloning utility similar to Ghost.

Statut de développement: 5 - Production / écurie
Langage naturel: Chinese (Traditional), English
Système d'exploitation: Linux
Langage de programmation: C, Perl, Coque Unix
Interface utilisateur: X11 Applications
Activity Percentile: 4
Activity Ranking: 96Ranking
Register Date: 2016-03-20 12:41
Dernière Mise à Jour: 2023-01-15 18:53

Ctlos Linux

Ctlos Linux — iso образ, основанный на Arch Linux, собранный с помощью archiso скриптов. Официально доступно несколько версий, с различными рабочими окружениями.

Web page: https://ctlos.github.io

Wiki: https://ctlos.github.io/wiki

Forum: https://forum.ctlos.ru

Telegram: https://tele.click/ctlos

Vk: https://vk.com/ctlos



Проект с открытым исходным кодом. Некоторые компоненты лицензируются в соответствии с GNU General Public License (GPL) 2.0 или более поздней.

Statut de développement: 4 - Beta, 5 - Production / écurie, 6 - Mature
Utilisateurs cibles: Advanced End Users, Développeurs
Langage naturel: English, Russian
Langage de programmation: Python, Coque Unix
Interface utilisateur: X11 Applications, GTK+, Qt
Activity Percentile: 1
Activity Ranking: 102Ranking
Register Date: 2020-06-29 02:14
Dernière Mise à Jour: 2014-06-10 10:53

Clonezilla

Clonezilla is a partition or disk cloning tool similar to Symantec Ghost. It saves and restores only blocks in use on the hard drive if the file system is supported. For unsupported file systems, dd is used instead. It has been used to clone a 5 GB system to 40 clients in about 10 minutes.

Dernière Mise à Jour: 2022-10-05 15:00

Linux-HA Japan

This is "Linux-HA Japan" site for developer.
Main site is here http://linux-ha.osdn.jp/ (Japanse only)

You can download Pacemaker,Heartbeat Corosync and other necessary RPM packages for Red Hat Enterprise Linux (RHEL) as yum repository.
http://osdn.jp/projects/linux-ha/releases/

Statut de développement: 5 - Production / écurie
Utilisateurs cibles: Développeurs, System Administrators
Langage naturel: Japanese
Système d'exploitation: Linux
Langage de programmation: C, Python, Coque Unix
Interface utilisateur: Command-line, Console (Text Based)
Register Date: 2007-10-15 16:45
Dernière Mise à Jour: 2013-09-13 21:52

bash programmable completion

Since v2.04, bash has allowed you to intelligently program and extend its
standard completion behavior to achieve complex command lines with just a few
keystrokes. Imagine typing ssh [Tab] and being able to complete on hosts from
your ~/.ssh/known_hosts files. Or typing man 3 str [Tab] and getting a list of
all string handling functions in the UNIX manual. mount system: [Tab] would
complete on all exported file-systems from the host called system, while make
[Tab] would complete on all targets in Makefile. This project was conceived to
produce programmable completion routines for the most common Linux/UNIX
commands, reducing the amount of typing sysadmins and programmers need to do on
a daily basis.

(Traduction automatique)
Dernière Mise à Jour: 2013-05-30 23:47

John the Ripper

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, lots of other hashes and ciphers are added in the community-enhanced version (-jumbo), and some are added in John the Ripper Pro.

Dernière Mise à Jour: 2014-06-12 11:00

Lynis

Lynis is an security auditing and hardening tool for Unix derivatives like Linux/BSD/Solaris. It performs an in-depth scan on the system to detect software and security issues. Besides information related to security, it will also scan for general system information, installed packages, and possible configuration mistakes. The software is aimed at assisting automated auditing, configuration management, software patch management, vulnerability detection, and malware scanning of Unix-based systems.

Dernière Mise à Jour: 2021-05-22 23:25

MinGW-w64 - for 32 and 64 bit Windows

mingw-w64プロジェクトは、 ネイティブなWindows 64ビットおよび32ビットのオペレーティングシステムのバイナリをサポートするためのgccの完全なランタイム環境です。

Dernière Mise à Jour: 2012-05-01 01:35

Rootkit Hunter

Rootkit Hunter scans files and systems for known and unknown rootkits, backdoors, sniffers, and malware. The application consists of the main shell script, a few text-based databases, and optional Perl scripts. It can recognise and run external applications like 'skdet' and 'unhide'. It should run on almost every Unix clone.

Dernière Mise à Jour: 2014-05-10 22:54

LEAF

LEAF is a secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways, it's primarily used as a Internet gateway, router, firewall, and wireless access point.

Dernière Mise à Jour: 2014-06-03 23:49

Check_MK

Check_MK is a complex addon for Nagios/Icinga and consists of three subprojects. The check and inventory system Check_MK is a general purpose Nagios plugin for retrieving data. It adopts a new approach for collecting data and obsoletes NRPE, check_by_ssh, NSClient, and check_snmp. It features a significant reduction of CPU use on the Nagios host and automatic inventory of items to be checked, and is especially useful with larger Nagios installations. "MK Livestatus" gives immediate and fast access to live and historic Nagios status data. It's a supported backend for many addons including NagVis, NagiosBP, and Thruk. "Check_MK Multisite" is a feature complete replacement for the Nagios GUI, and uses MK Livestatus as a backend. It is very fast, and supports efficient distributed monitoring.

Dernière Mise à Jour: 2009-02-08 12:34

MailScanner

MailScanner is an email virus scanner, vulnerability protector, and spam tagger. It supports the Postfix, Sendmail, Exim, Qmail, and ZMailer MTAs, and the Sophos, McAfee, F-Prot, F-Secure, CommandAV, InoculateIT, Inoculan, eTrust, Kaspersky, Nod32, AntiVir, BitDefender, RAV, Panda, DrWeb, ClamAV, and other anti-virus scanners. It uses SpamAssassin for highly successful spam identification, and is designed to handle denial of service attacks. It will detect password-protected zip files and apply filename checking to their contents. It is very easy to install, requires no changes at all to your sendmail.cf file, is designed to be lightweight, and won't grind your mail system to a halt with its load. It can be integrated into any email system, regardless of the software in use.

Dernière Mise à Jour: 2014-04-15 12:07

Arno's IPTABLES Firewall Script

Arno's IPTABLES Firewall Script is a secure stateful firewall for both single and multi-homed machines. It supports NAT and SNAT, port forwarding, ADSL ethernet modems with both static and dynamically assigned IPs, MAC address filtering, stealth port scan detection, DMZ support, protection against SYN/ICMP flooding, experimental IPv6 support, multi-interface/aliased-IP support, and extensive user definable logging with rate limiting to prevent log flooding. It has plugin support to add extra features (like SSH Brute Force protection and (Racoon) IPSEC support). It is easy to configure and highly customizable. A filter script that makes your firewall log more readable is also included.

(Traduction automatique)